Posted on: 11. 20. 26
Heat exchange efficiency directly affects how much fuel your processing facility can process. If thermal efficiency declines across your facility, you may see higher pressures and inconsistent condensate yields. Keeping heat-exchange efficiency at optimal levels keeps temperatures in an ideal range for separation. This helps prevent your gas compressors from overworking and optimizes natural gas output throughout your treatment process.
For additional solutions on conditioning field gas and temperature control, check out Pro-Gas services like JT Skids & Fuel Gas Conditioning and Natural Gas Coolers.
Knowing when to flush your lines and what to look for when monitoring fluid will help you keep production at optimal levels and avoid wasting fuel in your fired heaters.
What Is the Dynamic Between Heat Exchange Efficiency and Gas Production Output? The Key Points to Know
The efficiency with which you move heat through your system affects how much gas production output you can achieve.
As mentioned above, when heat transfer begins to fall, your system starts operating at less-than-ideal temperatures. When this happens, your gas will not cool enough before compression. This lowers gas density, so your compressors have to work harder to push the same amount of gas through the system. If your gas isn’t cooled enough, you will also lose efficiency because hydrocarbons and water vapor remain in your gas stream.
By keeping your heat-exchange efficiency high, you can run your system at cooler temperatures. This lets you extract more vapor from your raw gas stream.
Tip: Watch your gas chiller approach temperatures. If you start to see your approach temps widen by 3 degrees, you most likely have fouling in your heat exchangers.
How Does Thermal Efficiency in Processing Affect Your Ability to Recover Hydrocarbons?
Your ability to recover natural gas liquids and water vapor from your gas stream depends on your processing thermal efficiency.
Many of your processes in a gas processing plant rely on specific temperatures to operate correctly. If your lean/rich amine heat exchanger doesn’t recover heat efficiently, your lean amine will not be cool enough to properly remove acid gas from your gas stream. This will force you to reduce the amount of gas processed through your facility to meet pipeline specs.
When recovering NGLs, it’s important to keep temperatures in the correct range. Many cryogenic plants must reduce production if they can’t reach the proper temperatures during expansion. If your gas isn’t cool enough when it passes through your expander, you will not be able to knock out all your liquid hydrocarbons. This will cost you money on products that could have been stored in portable NGL storage or sold at a higher value.
| Process Unit | Heat Transfer Should | When Efficiency Drops | How It Affects Output |
| Inlet Gas Chiller | Remove heat from your raw gas stream prior to separation | Will cause you to have liquid carryover into your gas compressors | You will have to reduce the amount of gas that can pass through your compressors |
| Lean/Rich Amine Heat Exchanger | Preheat your rich amine and cool your lean amine | Your reboilers will have to work harder to get your rich amine to the proper temperature | You will have to reduce the amount of gas that can pass through your facility to keep your acid gas at pipeline specs |
| Glycol Heat Exchanger | Preheat your rich glycol using your lean glycol | Will not allow you to properly recover your glycol | You will reduce the gas that can pass through your facility to keep your water content at pipeline specs |
| Condenser | Remove liquid hydrocarbons from your gas stream | You will lose product that can be sold | Will decrease your overall process efficiency |
Why Do Industrial Heat Exchangers Control Your Entire System?
Industrial heat exchangers control many aspects of your process. From pressure to how fast fluid can travel through your system.
If you start to see your heat exchangers lose efficiency due to fouling, you will see pressure increases throughout your system. If your system pressures increase, you will have to reduce the amount of gas that can pass through your facility.
Another reason to keep your heat exchangers running efficiently is that you will be pushing more heat into your downstream processes. This will cause your piping to corrode faster and force you to operate at lower pressures.
- How are your heat exchangers running?
- Are your gas chiller approach temps increasing?
- Are you compressor suction temps getting higher than normal on hot days?
- Do you have to increase your reboiler duty to keep your gas at spec?
If you answered yes to any of these questions your system may be losing you money.
How Can You Increase Your Natural Gas Output? Tips to Improve Your Process
There are many ways to help your facility optimizes natural gas output. One of the easiest ways to improve your process is to keep your heat exchangers free of fouling.
Fouling will always be the enemy of your process. Make sure you are flushing your lines and keeping your equipment clean. There are many systems on the market that can help you predict when you will need to flush your lines.
Another way to improve your process is to upgrade your current heat exchangers to more efficient models. By upgrading your heat exchangers you can increase the amount of gas that can pass through your facility.
Here are some steps you can take to improve your process.
- Take your current temperatures and compare them to your heat exchangers specs.
- Monitor your pressure drops to see if there is a loss in velocity.
- Flush your heat exchangers when necessary.
- Upgrade your heat exchangers to a more efficient model.
How Can I Improve My Thermal Efficiency and Lower My Operating Costs?
By upgrading your heat exchangers you can improve your thermal efficiency and lower your operating costs.
There are many ways that you can use your heat exchangers to lower your operating costs. One way is to use your heat exchangers to preheat your feed stock. By using your heat exchangers to preheat your feed stock you are using less fuel gas to heat your process.
When you lower your fuel gas usage you are increasing your sales gas volume. This will help you make more money on each mscf of gas that you produce.
Contact Pro-Gas LLC Today: Expert Gas Production Help
Pro-Gas LLC can help you with all of your gas processing needs. We have the knowledge and equipment to help you improve your process and increase your production.
FAQ
Q. How does heat exchange efficiency affect your gas production?
When your heat exchange efficiency drops, you will have to operate your system at higher temperatures. This lowers gas density and forces your compressors to work harder. You will also begin to see pressure increases throughout your system, which will cause you to lower your gas production output.
Q. What causes your heat exchangers to lose efficiency?
Fouling is the number one cause of heat exchangers losing efficiency. When your heat exchangers become fouled, they can’t transfer heat as efficiently as they should. This will cause your system to operate at higher temperatures and lower your gas production output.
Q. How often should I be checking my heat exchangers?
You should check your heat exchangers daily. Monitor your approach temperatures and pressure drops to see if your heat exchangers are operating efficiently. If you notice any changes, flush your heat exchangers to prevent further efficiency loss.
